Digisol DG-BG4300NU User Manual page 47

The following table describes the parameters of this page:
Field
IP Address
Subnet Mask
Secondary IP
IGMP Snooping
LAN Port
Link Speed /
Duplex Mode
MAC Address
Control
Add
Current allowed
MAC address table
Enter the IP address
recommended to use an address from a block that is
reserved for private use. This address block for
example is 192.168.1.1 - 192.168.1.254.
Enter the subnet mask of LAN interface. The range of
subnet mask is from 255.255.0.0 - 255.255.255.254.
Select it to enable the secondary LAN IP address. The
two LAN IP addresses must be in different networks
When IGMP snooping is enabled, only hosts that
belong to the group receive the multicast packets. If a
host is deleted from the group, the host cannot receive
the multicast packets any more.
You can choose the LAN interface you want to
configure.
You can select the following modes from the
drop-downlist:100Mbps/FullDuplex,100Mbps/Half
Duplex,10Mbps/FullDuplex,10Mbps/HalfDuplex,Auto
Negotiation.
It is the access control based on MAC address. Select
it, and the host whose MAC address is listed in the
Current Allowed MAC Address table can access the
router.
Enter MAC address and then click it to add a new MAC
address.
All the allowed MAC addresses added will be listed
here.
47
DG-BG4300NU User Manual
Description
of LAN interface. It is