4.6.7.3
Tunnel
Choose Tunnel in the left pane, and the page shown in the following figure appears. You
may configure tunnels to connect to ipv4 and ipv6 networks.
The following table describes the parameters and button of this page.
Field
General v6inv4
Tunnel
Interface Name
Tunnel Endpoints
Local IPv6 Address
Specify the general
encapsulated in ipv4 packets,
Select the tunnel interface name, user can set 2 v6inv4
tunnel.
Specify the ipv4 address for tunnel endpoints.
Specify the ipv6 address for tunnel local.
118
DG-BG4300NU User Manual
Description
v6inv4 tunnel, ipv6 packet is