DHCP Server
Enable DHCP Server
Start IP
End IP
Max Lease Time
For subsequent configuration, refer to the description in the above section PPPoE/PPPoA.
Note:
You may configure at most eight ATM VCs. To add an ATM VC, refer
WAN
two LAN IP addresses must be in the different network.
Select the checkbox to enable DHCP server.
Enter the start IP address that the DHCP sever assigns.
Enter the end IP address that the DHCP server assigns.
The lease time determines the period that the PCs retain
the assigned IP addresses before the IP addresses
change.
37
DG-BG4300NU User Manual
section 3.4.2.1