Address
Destination IP
Address
Mask Address
S-Port
D-Port
Enable
4.5.2.2
IPv6/Port Filter
Click IPv6/Port Filter in the left pane, and the page shown in the following figure appears.
Entries in this table are used to restrict certain types of ipv6 data packets from your local
network to the Internet through the Gateway.
Type the IPv4 address of destination device or host.
Type the subnet mask address.
Type the Source port range.
Type the destination port range.
Select check box to enable the rule or uncheck to disable the
rule.
DG-BG4300NU User Manual
82