Digisol DG-BG4300NU User Manual page 96

Set direction of the data packets to WAN, the page shown in the following figure appears.
The following table describes the parameters and buttons of this page:
Field
Direction Select
WAN Setting
IP Address
WAN Interface
Select the router interface. You can select LAN or WAN.
In this example, WAN is selected.
You can choose Interface or IP Address. When IP
address option is selected only then IP address field will
appear.
Enter the IP address on the WAN. Only the IP address
that is in the same network segment with the IP address
on the WAN can access the router.
Choose the interface that permits data packets from
96
DG-BG4300NU User Manual
Description