Digisol DG-BG4300NU User Manual page 31

After the settings are done, click Next, the page as shown in the following figure appears.
The following table describes the parameters in this page:
Field
LAN Interface Setup
LAN IP
LAN Netmask
Enable Secondary IP
DHCP Server
Enter the IP address of LAN interface. Its valid value is
in the range of 192.168.1.1 to 192.168.1.254. The
default IP address is 192.168.1.1.
Enter the subnet mask of LAN interface. Its valid value
is in the range of 255.255.255.0 to 255.255.255.254.
Select the checkbox to enable the secondary LAN IP.
The two LAN IP addresses must be in different
networks.
31
DG-BG4300NU User Manual
Description