Add Application Rule - ZyXEL Communications ZyWall 110 User Manual

Table 255 Configuration > Object > Application > Application (continued)
LABEL
Signature
Information
Current
Version
Released
Date
Update
Signatures

35.5.1 Add Application Rule

Click Add in Configuration > Object > Application > Application to create a new application
rule. In the first screen you type a name to identify this application object and write an optional
brief description of it.
You then click Add again to choose the signatures that should go into this object.
Figure 399 Configuration > Object > Application > Application > Add Application Rule
The following table describes the labels in this screen.
Table 256 Configuration > Object > Application > Application > Add Application Rule
LABEL
Name
Description
Add
Remove
#
Category
Chapter 35 Object
DESCRIPTION
An activated license allows you to download signatures to the ZyWALL/USG from
myZyXEL.com. These fields show details on the signatures downloaded.
The version number increments when signatures are updated at myZyXEL.com. This field
shows the current version downloaded to the ZyWALL/USG.
This field shows the date (YYYY-MM-DD) and time the current signature version was
released.
If your signature set is not the most recent, click this to go to Configuration > Licensing >
Signature Update > IDP / AppPatrol to update your signatures.
DESCRIPTION
Type a name to identify this application rule. You may use 1-31 alphanumeric characters,
underscores( ), or dashes (-), but the first character cannot be a number. This value is
_
case-sensitive.
You may type some extra information on the application object here.
Click this to create a new application rule.
Click this to remove the selected application rule.
This field is a sequential value associated with this application rule..
This field shows the category to which the signature belongs in this application rule.
ZyWALL/USG Series User's Guide
598