Detected Device - ZyXEL Communications ZyWall 110 User Manual

Table 56 Monitor > Wireless > Station List
LABEL
Tx Rate
Rx Rate
Association Time

6.14.6 Detected Device

Use this screen to view information about wireless devices detected by the AP. Click Monitor >
Wireless > Detected Device to access this screen.
Note: At least one radio of the APs connected to the ZyWALL/USG must be set to monitor
mode (in the Configuration > Wireless > AP Management screen) in order to
detect other wireless devices in its vicinity.
Figure 112 Monitor > Wireless > Detected Device
The following table describes the labels in this screen.
Table 57 Monitor > Wireless > Detected Device
LABEL
Mark as Rogue
AP
Mark as Friendly
AP
#
Status
Device
Role
Chapter 6 Monitor
DESCRIPTION
This field displays the transmit data rate of the station.
This field displays the receive data rate of the station.
This field displays the time duration the station was online and offline.
DESCRIPTION
Click this button to mark the selected AP as a rogue AP. A rogue AP can be contained in the
Configuration > Wireless > MON Mode screen.
Click this button to mark the selected AP as a friendly AP. For more on managing friendly
APs, see the Configuration > Wireless > MON Mode screen.
This is the station's index number in this list.
This indicates the detected device's status.
This indicates the detected device's network type (such as infrastructure or ad-hoc).
This indicates the detected device's role (such as friendly or rogue).
ZyWALL/USG Series User's Guide
135