ZyXEL Communications ZyWall 110 User Manual page 656

Security firewalls
Hide thumbs Also See for ZyWall 110:
Table of Contents

Advertisement

Figure 447 Configuration > DHCPv6 > Lease > Add
The following table describes the labels in this screen.
Table 294 Configuration > DHCPv6 > Lease > Add
LABEL
DESCRIPTION
Name
Type the name for this lease object. You may use 1-31 alphanumeric characters,
underscores(
case-sensitive.
Lease Type
Select the lease type for this lease object. You can choose from Prefix Delegation,
DNS Server, Address, Address Pool, NTP Server, or SIP Server.
Interface
Select the interface for this lease object.
DUID
If you select Prefix Delegation or Address in the Lease Type field, enter the DUID of
the interface.
Prefix
If you select Prefix Delegation or Address in the Lease Type field, enter the IPv6
prefix of the interface.
DNS Server
If you select DNS Server in the Lease Type field, select a request object or User
Defined in the DNS Server field and enter the IP address of the DNS server in the
User Defined Address field below.
Starting IP Address
If you select Address Pool in the Lease Type field, enter the first of the contiguous
addresses in the IP address pool.
End IP Address
If you select Address Pool in the Lease Type field, enter the last of the contiguous
addresses in the IP address pool.
NTP Server
If you select NTP Server in the Lease Type field, select a request object or User
Defined in the NTP Server field and enter the IP address of the NTP server in the User
Defined Address field below.
SIP Server
If you select SIP Server in the Lease Type field, select a request object or User
Defined in the SIP field and enter the IP address of the SIP server in the User Defined
Address field below.
User Defined
If you select DNS Server, NTP Server, or SIP Server as your lease type, you must
Address
enter the IP address of the server your selected.
OK
Click OK to save your changes back to the ZyWALL/USG.
Cancel
Click Cancel to exit this screen without saving your changes.
Chapter 35 Object
), or dashes (-), but the first character cannot be a number. This value is
_
ZyWALL/USG Series User's Guide
656

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents