The Anti-Spam Status Screen - ZyXEL Communications ZyWall 110 User Manual

Table 65 Monitor > UTM Statistics > Anti-Spam (continued)
LABEL
Sender Email Address
Occurrence

6.22.2 The Anti-Spam Status Screen

Click Monitor > UTM Statistics > Anti-Spam > Status to display the Anti-Spam Status screen.
Use the Anti-Spam Status screen to see how many e-mail sessions the anti-spam feature is
scanning and statistics for the DNSBLs.
Figure 125 Monitor > UTM Statistics > Anti-Spam > Status
The following table describes the labels in this screen.
Table 66 Monitor > UTM Statistics > Anti-Spam > Status
LABEL
Refresh
Flush
Concurrent Mail Session
Scanning
Mail Scan Statistics
#
Service
Chapter 6 Monitor
DESCRIPTION
This column displays when you display the entries by Sender Email Address. This
column displays the e-mail addresses from which the ZyWALL/USG has detected
the most spam.
This field displays how many spam e-mails the ZyWALL/USG detected from the
sender.
DESCRIPTION
Click this button to update the information displayed on this screen.
Click this button to clear the DNSBL statistics. This also clears the concurrent mail
session scanning bar's historical high.
The darker shaded part of the bar shows how much of the ZyWALL/USG's total
spam checking capability is currently being used.
The lighter shaded part of the bar and the pop-up show the historical high.
The first number to the right of the bar is how many e-mail sessions the ZyWALL/
USG is presently checking for spam. The second number is the maximum number
of e-mail sessions that the ZyWALL/USG can check at once. An e-mail session is
when an e-mail client and e-mail server (or two e-mail servers) connect through
the ZyWALL/USG.
These are the statistics for the service the ZyWALL/USG uses. These statistics are
for when the ZyWALL/USG actually queries the service servers.
This is the entry's index number in the list.
This displays the name of the service.
ZyWALL/USG Series User's Guide
148