Internet Access: Pptp - ZyXEL Communications ZyWall 110 User Manual

• First / Second DNS Server: These fields display if you selected static IP address assignment.
The Domain Name System (DNS) maps a domain name to an IP address and vice versa. Enter a
DNS server's IP address(es). The DNS server is extremely important because without it, you
must know the IP address of a computer before you can access it. The ZyWALL/USG uses these
(in the order you specify here) to resolve domain names for VPN, DDNS and the time server.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not configure a
DNS server, you must know the IP address of a machine in order to access it.

2.1.4 Internet Access: PPTP

Note: Enter the Internet access information exactly as given to you by your ISP.
Figure 26 Internet Access: PPTP Encapsulation
2.1.4.1 ISP Parameters
• Authentication Type - Select an authentication protocol for outgoing calls. Options are:
• CHAP/PAP - Your ZyWALL/USG accepts either CHAP or PAP when requested by the remote
node.
• CHAP - Your ZyWALL/USG accepts CHAP only.
• PAP - Your ZyWALL/USG accepts PAP only.
• MSCHAP - Your ZyWALL/USG accepts MSCHAP only.
• MSCHAP-V2 - Your ZyWALL/USG accepts MSCHAP-V2 only.
• Type the User Name given to you by your ISP. You can use alphanumeric and -_@$./ characters,
and it can be up to 31 characters long.
• Type the Password associated with the user name. Use up to 64 ASCII characters except the []
and ?. This field can be blank. Re-type your password in the next field to confirm it.
Chapter 2 Installation Setup Wizard
ZyWALL/USG Series User's Guide
45