Content Filter Profile Add Or Edit Screen - ZyXEL Communications ZyWall 110 User Manual

Table 194 Configuration > UTM Profile > Content Filter > Profile (continued)
LABEL
Redirect URL
Profile Management
Add
Edit
Remove
Object Reference
#
Name
Description
Reference
License Status
License Type
Expiration Date
Register Now
Apply
Reset

29.3 Content Filter Profile Add or Edit Screen

Click Configuration > UTM > Content Filter > Profile > Add or Edit to open the Add Filter
Profile screen. Configure Category Service and Custom Service tabs.
Chapter 29 Content Filtering
DESCRIPTION
Enter the URL of the web page to which you want to send users when their web
access is blocked by content filter. The web page you specify here opens in a new
frame below the denied access message.
Use "http://" or "https://" followed by up to 262 characters (0-9a-zA-Z;/
?:@&=+$\.-_!~*'()%). For example, http://192.168.1.17/blocked access.
Click Add to create a new content filter rule.
Click Edit to make changes to a content filter rule.
Click Remove the delete a content filter rule.
Select an entry and click Object References to open a screen that shows which
settings use the entry. Click Refresh to update information on this screen.
This column lists the index numbers of the content filter profile.
This column lists the names of the content filter profile rule.
This column lists the description of the content filter profile rule.
This displays the number of times an Object Reference is used in a rule.
This read-only field displays the status of your content-filtering database service
registration.
Not Licensed displays if you have not successfully registered and activated the
service.
Expired displays if your subscription to the service has expired.
Licensed displays if you have successfully registered the ZyWALL/USG and
activated the service.
You can view content filter reports after you register the ZyWALL/USG and
activate the subscription service in the Registration screen.
This read-only field displays what kind of service registration you have for the
content-filtering database.
None displays if you have not successfully registered and activated the service.
Standard displays if you have successfully registered the ZyWALL/USG and
activated the service.
Trial displays if you have successfully registered the ZyWALL/USG and activated
the trial service subscription.
This field displays the date your service license expires.
This link appears if you have not registered for the service or the service has
expired. Click this link to go to the screen where you can register for the service.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
468