The Trunk Summary Screen - ZyXEL Communications ZyWall 110 User Manual

Figure 176 Spillover Algorithm Example

9.12 The Trunk Summary Screen

Click Configuration > Network > Interface > Trunk to open the Trunk screen. This screen lists
the configured trunks and the load balancing algorithm that each is configured to use.
Figure 177 Configuration > Network > Interface > Trunk
The following table describes the items in this screen.
Table 110 Configuration > Network > Interface > Trunk
LABEL
Show Advanced
Settings / Hide
Advanced Settings
Configuration
Disconnect
Connections
Before Falling Back
Chapter 9 Interfaces
DESCRIPTION
Click this button to display a greater or lesser number of configuration fields.
Configure what to do with existing passive mode interface connections when an
interface set to active mode in the same trunk comes back up.
Select this to terminate existing connections on an interface which is set to passive
mode when any interface set to active mode in the same trunk comes back up.
ZyWALL/USG Series User's Guide
258