Date And Time - ZyXEL Communications ZyWall 110 User Manual

Figure 449 Configuration > System > USB Storage
The following table describes the labels in this screen.
Table 296 Configuration > System > USB Storage
LABEL
Activate USB
storage service
Disk full warning
when remaining
space is less
than
Apply
Reset

36.4 Date and Time

For effective scheduling and logging, the ZyWALL/USG system time must be accurate. The ZyWALL/
USG's Real Time Chip (RTC) keeps track of the time and date. There is also a software mechanism
to set the time manually or get the current time and date from an external server.
To change your ZyWALL/USG's time based on your local time zone and date, click Configuration >
System > Date/Time. The screen displays as shown. You can manually set the ZyWALL/USG's
time and date or have the ZyWALL/USG get the date and time from a time server.
Chapter 36 System
DESCRIPTION
Select this if you want to use the connected USB device(s).
Set a number and select a unit (MB or %) to have the ZyWALL/USG send a warning
message when the remaining USB storage space is less than the value you set here.
Click Apply to save your changes back to the ZyWALL/USG.
Click Reset to return the screen to its last-saved settings.
ZyWALL/USG Series User's Guide
659