ZyXEL Communications ZyWall 110 User Manual page 249

Table 104 Configuration > Network > Interface > Bridge > Add / Edit (continued)
LABEL DESCRIPTION
Default Router If you set this interface to DHCP Server, you can select to use either the interface's IP
address or another IP address as the default router. This default router will become the
DHCP clients' default gateway.
To use another IP address as the default router, select Custom Defined and enter the
IP address.
Lease time Specify how long each computer can use the information (especially the IP address)
before it has to request the information again. Choices are:
infinite - select this if IP addresses never expire
days, hours, and minutes - select this to enter how long IP addresses are valid.
Extended This table is available if you selected DHCP server.
Options
Configure this table if you want to send more information to DHCP clients through
DHCP packets.
Add Click this to create an entry in this table. See
Edit Select an entry in this table and click this to modify it.
Remove Select an entry in this table and click this to delete it.
# This field is a sequential value, and it is not associated with any entry.
Name This is the option's name.
Code This is the option's code number.
Type This is the option's type.
Value This is the option's value.
Enable IP/MAC Select this option to have this interface enforce links between specific IP addresses and
Binding
specific MAC addresses. This stops anyone else from manually using a bound IP
address on another device connected to this interface. Use this to make use only the
intended users get to use specific IP addresses.
Enable Logs for Select this option to have the ZyWALL/USG generate a log if a device connected to this
IP/MAC Binding
interface attempts to use an IP address that is bound to another device's MAC address.
Violation
Static DHCP Configure a list of static IP addresses the ZyWALL/USG assigns to computers connected
Table
to the interface. Otherwise, the ZyWALL/USG assigns an IP address dynamically using
the interface's IP Pool Start Address and Pool Size.
Add Click this to create a new entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
# This field is a sequential value, and it is not associated with a specific entry.
IP Address Enter the IP address to assign to a device with this entry's MAC address.
MAC Address Enter the MAC address to which to assign this entry's IP address.
Description Enter a description to help identify this static DHCP entry. You can use alphanumeric
and ()+/:=?!*#@$_%- characters, and it can be up to 60 characters long.
Connectivity Check The interface can regularly check the connection to the gateway you specified to make
sure it is still available. You specify how often the interface checks the connection, how
long to wait for a response before the attempt is a failure, and how many consecutive
failures are required before the ZyWALL/USG stops routing to the gateway. The
ZyWALL/USG resumes routing to the gateway the first time the gateway passes the
connectivity check.
Enable Select this to turn on the connection check.
Connectivity
Check
Chapter 9 Interfaces
ZyWALL/USG Series User's Guide
249
Section 9.3.4 on page 202.