Vpn Setup Wizard - ZyXEL Communications ZyWall 110 User Manual

Figure 47 Interface Wizard: Summary WAN (PPTP Shown)
The following table describes the labels in this screen.
Table 17 Interface Wizard: Summary WAN
LABEL
Encapsulation
Service Name
Server IP
User Name
Nailed-Up
Idle Timeout
Connection ID
WAN Interface
Zone
IP Address
Assignment
First DNS Server
Second DNS
Server
Close

4.3 VPN Setup Wizard

Click VPN Setup in the main Quick Setup screen to open the VPN Setup Wizard Welcome screen.
Chapter 4 Quick Setup Wizards
DESCRIPTION
This displays what encapsulation this interface uses to connect to the Internet.
This field only appears for a PPPoE interface. It displays the PPPoE service name specified
in the ISP account.
This field only appears for a PPTP interface. It displays the IP address of the PPTP server.
This is the user name given to you by your ISP.
If No displays the connection will not time out. Yes means the ZyWALL/USG uses the idle
timeout.
This is how many seconds the connection can be idle before the router automatically
disconnects from the PPPoE server. 0 means no timeout.
If you specified a connection ID, it displays here.
This identifies the interface you configure to connect with your ISP.
This field displays to which security zone this interface and Internet connection will belong.
This field displays whether the WAN IP address is static or dynamic (Auto).
If the IP Address Assignment is Static, these fields display the DNS server IP
address(es).
Click Close to exit the wizard.
ZyWALL/USG Series User's Guide
62