The Snat Status Screen - ZyXEL Communications ZyWall 110 User Manual

Security firewalls
Hide thumbs Also See for ZyWall 110:
Table of Contents

Advertisement

Table 340 Maintenance > Packet Flow Explore > Routing Status (continued)
LABEL
Outgoing
Gateway
The following fields are available if you click Dynamic VPN or SiteToSite VPN
section.
#
Source
Destination
VPN Tunnel
The following fields are available if you click Default WAN Trunk in the Routing Flow section.
#
Source
Destination
Trunk

40.3 The SNAT Status Screen

The SNAT Status screen allows you to view and quickly link to specific source NAT (SNAT) settings.
Click a function box in the SNAT Flow section, the related SNAT rules (activated) will display in the
SNAT Table section. To access this screen, click Maintenance > Packet Flow Explore > SNAT
Status.
The order of the SNAT flow may vary depending on whether you:
• select use default SNAT in the CONFIGURATION > Network > Interface > Trunk screen.
• use policy routes to control 1-1 NAT by using the policy control-virtual-server-rules
activate command.
Note: Once a packet matches the criteria of an SNAT rule, the ZyWALL/USG takes the
corresponding action and does not perform any further flow checking.
Figure 535 Maintenance > Packet Flow Explore > SNAT Status (Policy Route SNAT)
Chapter 40 Packet Flow Explore
DESCRIPTION
This is the name of an interface which transmits packets out of the ZyWALL/USG.
This is the IP address of the gateway in the same network of the outgoing interface.
This field is a sequential value, and it is not associated with any entry.
This is the IP address(es) of the local VPN network.
This is the IP address(es) for the remote VPN network.
This is the name of the VPN tunnel.
This field is a sequential value, and it is not associated with any entry.
This is the source IP address(es) from which the packets are sent. any means any IP
address.
This is the destination IP address(es) to which the packets are transmitted. any means
any IP address.
This is the name of the WAN trunk through which the matched packets are transmitted.
ZyWALL/USG Series User's Guide
753
in the Routing Flow

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents