ZyXEL Communications ZyWall 110 User Manual page 629

35.10.3.1 Creating an Authentication Method Object
Follow the steps below to create an authentication method object.
Click Configuration > Object > Auth. Method.
1
Click Add.
2
Specify a descriptive name for identification purposes in the Name field. You may use 1-31
3
alphanumeric characters, underscores(_), or dashes (-), but the first character cannot be a number.
This value is case-sensitive. For example, "My_Device".
Click Add to insert an authentication method in the table.
4
Select a server object from the Method List drop-down list box.
5
You can add up to four server objects to the table. The ordering of the Method List column is
6
important. The ZyWALL/USG authenticates the users using the databases (in the local user
database or the external authentication server) in the order they appear in this screen.
If two accounts with the same username exist on two authentication servers you specify, the
ZyWALL/USG does not continue the search on the second authentication server when you enter the
username and password that doesn't match the one on the first authentication server.
Note: You can NOT select two server objects of the same type.
Click OK to save the settings or click Cancel to discard all changes and return to the previous
7
screen.
Figure 427 Configuration > Object > Auth. Method > Add
The following table describes the labels in this screen.
Table 279 Configuration > Object > Auth. Method > Add
LABEL
Name
Add
Edit
Chapter 35 Object
DESCRIPTION
Specify a descriptive name for identification purposes.
You may use 1-31 alphanumeric characters, underscores(_), or dashes (-), but the first
character cannot be a number. This value is case-sensitive. For example, "My_Device".
Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
ZyWALL/USG Series User's Guide
629