Add/Edit Trusted Radius Client - ZyXEL Communications ZyWall 110 User Manual

Security firewalls

Hide thumbs Also See for ZyWall 110:

Table of Contents

Table 315 Configuration > System > Auth. Server (continued)

36.12.1 Add/Edit Trusted RADIUS Client

Click Configuration > System > Auth. Server to display the Auth. Server screen. Click the Add

icon or an Edit icon to display the following screen. Use this screen to create a new entry or edit an

existing one.

Figure 492 Configuration > System > Auth. Server > Add/Edit

The following table describes the labels in this screen.

Table 316 Configuration > System > Auth. Server > Add/Edit

Profile Name

Chapter 36 System

This is the IP address of the RADIUS client that is allowed to exchange messages with the

This is the subnet mask of the RADIUS client.

This is the description of the RADIUS client.

Click Apply to save your changes back to the ZyWALL/USG.

Click Reset to return the screen to its last-saved settings.

Select this check box to make this profile active.

Enter a descriptive name (up to 31 alphanumerical characters) for identification purposes.

Enter the IP address of the RADIUS client that is allowed to exchange messages with the

Enter the subnet mask of the RADIUS client.

Enter a password (up to 64 alphanumeric characters) as the key to be shared between the

ZyWALL/USG and the RADIUS client.

The key is not sent over the network. This key must be the same on the external

authentication server and the ZyWALL/USG.

Enter the description of each server, if any. You can use up to 60 printable ASCII

Click OK to save the changes.

Click Cancel to discard the changes.

ZyWALL/USG Series User's Guide

Show Quick Links

Table of Contents