User/Group Mac Address Summary Screen - ZyXEL Communications ZyWall 110 User Manual

The following table describes the labels in this screen.
Table 240 Web Configurator for Non-Admin Users
LABEL
User-defined
lease time (max
... minutes)
Renew
Updating lease
time
automatically
Remaining time
before lease
timeout
Remaining time
before auth.
timeout

35.2.5 User/Group MAC Address Summary Screen

This screen shows the MAC addresses of wireless clients, which can be authenticated by their MAC
addresses using the local user database. Click Configuration > Object > User/Group > MAC
Address to open this screen.
Note: You need to configure an SSID security profile's MAC authentication settings to
have the AP use the ZyWALL/USG's local database to authenticate wireless clients
by their MAC addresses.
Figure 382 Configuration > Object > User/Group > MAC Address
The following table describes the labels in this screen.
Table 241 Configuration > Object > User/Group > MAC Address
LABEL
Add
Edit
Chapter 35 Object
DESCRIPTION
Access users can specify a lease time shorter than or equal to the one that you specified.
The default value is the lease time that you specified.
Access users can click this button to reset the lease time, the amount of time remaining
before the ZyWALL/USG automatically logs them out. The ZyWALL/USG sets this amount
of time according to the
• User-defined lease time field in this screen
• Lease time field in the User Add/Edit screen (see
• Lease time field in the Setting screen (see
This box appears if you checked the Allow renewing lease time automatically box in
the Setting screen. (See Section 35.2.4 on page
box to reset the lease time automatically 30 seconds before it expires. Otherwise, access
users have to click the Renew button to reset the lease time.
This field displays the amount of lease time that remains, though the user might be able to
reset it.
This field displays the amount of time that remains before the ZyWALL/USG automatically
logs the access user out, regardless of the lease time.
DESCRIPTION
Click this to create a new entry.
Double-click an entry or select it and click Edit to open a screen where you can modify the
entry's settings.
ZyWALL/USG Series User's Guide
575
Section 35.2.5.1 on page
Section 35.2.4 on page 570)
570.) Access users can select this check
576)