Ap Policy - ZyXEL Communications ZyWall 110 User Manual

Security firewalls

Hide thumbs Also See for ZyWall 110:

Table of Contents

Table 75 Configuration > Wireless > AP Management > Edit AP List (continued)

Radio 1/2 OP Mode

Radio 1/2 Profile

Force Overwrite

Management VLAN

As Native VLAN

8.3.2 AP Policy

Use this screen to configure the AP controller's IP address on the managed APs and determine the

action the managed APs take if the current AP controller fails. Click Configuration > Wireless >

AP Management > AP Policy to access this screen.

Figure 137 Configuration > Wireless > AP Management > AP Policy

Chapter 8 Wireless

Enter a description for this AP. You can use up to 31 characters, spaces and underscores

Select the operating mode for radio 1 or radio 2.

AP Mode means the AP can receive connections from wireless clients and pass their

data traffic through to the ZyWALL/USG to be managed (or subsequently passed on to

an upstream gateway for managing).

Select a profile from the list. If no profile exists, you can create a new one through the

Create new Object menu.

Select this to have the ZyWALL/USG change the AP's management VLAN to match the

configuration in this screen.

Enter a VLAN ID for this AP.

Select this option to treat this VLAN ID as a VLAN created on the ZyWALL/USG and not

one assigned to it from outside the network.

Click OK to save your changes back to the ZyWALL/USG.

Click Cancel to close the window with changes unsaved.

ZyWALL/USG Series User's Guide

Show Quick Links

Table of Contents