Set Up The Content Filter On The Zywall/Usg - ZyXEL Communications ZyWALL 110 Handbook
Zywall/usg series security firewalls
Hide thumbs
Also See for ZyWALL 110:
- User manual (1090 pages) ,
- Handbook (749 pages) ,
- Handbook & instructions (255 pages)
Table of Contents
Advertisement
Figure 124 ZyWALL/USG with Block Facebook Settings Example
Note: All network IP addresses and subnet masks are used as examples in this article.
Please replace them with your actual network IP addresses and subnet masks. This
example was tested using USG310 (Firmware Version: ZLD 4.13).
3.5.1 Set Up the Content Filter on the ZyWALL/USG
In the ZyWALL/USG, go to CONFIGURATION > UTM Profile> Content Filter > Profile
1
Management > Add Filter File > Custom Service. Configure a Name for you to identify the
Content Filter Profile and select Enable Custom Service.
Figure 125 CONFIGURATION > UTM Profile> Content Filter > Profile > Profile Management > Add
Filter File > Custom Service > General Settings
Scroll down to the Blocked URL Keywords section, click Add and use "*" as a wildcard to match
2
any string in trusted/forbidden web sites and blocked URL keywords (*.facebook*.com in this
example). Click OK.
Figure 126 CONFIGURATION > UTM Profile> Content Filter > Profile > Profile Management > Add
Filter File > Custom Service > Blocked URL Keywords
Chapter 3 Protect Your Network with UTM
ZyWALL/USG Series User's Guide
68
Advertisement
Table of Contents
