Wireless; Wireless Ap Information: Ap List - ZyXEL Communications USG40 User Manual

Table 49 Monitor > System Status > USB Storage (continued)
LABEL
Status
Detail

6.13 Wireless

Wireless contains AP information and Station Info menus.

6.13.1 Wireless AP Information: AP List

The AP Information menu contains AP List and Radio List screens. Click Monitor > Wireless >
AP Information to display the AP List screen.
Figure 102 Monitor > Wireless > AP List
The following table describes the labels in this screen.
Table 50 Monitor > Wireless > AP Information
LABEL
Add to Mgnt AP List
More Information
#
Status
Chapter 6 Monitor
DESCRIPTION
Ready - you can have the ZyWALL/USG use the USB storage device.
Click Remove Now to stop the ZyWALL/USG from using the USB storage device so
you can remove it.
Unused - the connected USB storage device was manually unmounted by using
the Remove Now button or for some reason the ZyWALL/USG cannot mount it.
Click Use It to have the ZyWALL/USG mount a connected USB storage device. This
button is grayed out if the file system is not supported (unknown) by the ZyWALL/
USG.
none - no USB storage device is connected.
This field displays any other information the ZyWALL/USG retrieves from the USB
storage device.
• Deactivated - the use of a USB storage device is disabled (turned off) on the
ZyWALL/USG.
• OutofSpace - the available disk space is less than the disk space full threshold.
• Mounting - the ZyWALL/USG is mounting the USB storage device.
• Removing - the ZyWALL/USG is unmounting the USB storage device.
• none - the USB device is operating normally or not connected.
DESCRIPTION
Click this to add new Access Points
Click this icon to see AP Information and Station count.
This field is a sequential value, and it is not associated with a specific AP.
This field displays the on-line or off-line status of the AP, move the cursor to the
AP icon and a status pop up message will appear.
ZyWALL/USG Series User's Guide
120