Removal Of Electrical Box - Daikin FTXS20G2V1B Service Manual

Indoor Unit
1.5

Removal of Electrical Box

Procedure
Step
1 The figure shows the
connections of wire
harnesses.
2 Remove the screw of
the wire fixture.
3 Remove the screws on
the terminal board to
disconnect the
connecting wires.
4 Disconnect the
connector for fan motor
[S1].
165
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Electrical box
[S1]
Points
Preparation
„ Remove the front grille
according to the "Removal
of Front Grille".
(R7931)
Wire
fixture
(R7932)
Terminal
board
Connecting
wires
(R7933)
(R7934)
Removal Procedure
SiENBE04-808_A