Removal Of Electrical Box - Daikin FVXD56FV2C Service Manual

Si06-762

5. Removal of Electrical Box

Procedure
Step
1. Remove the electrical box.
Remove the electrical box
cover.
Disconnect the earth
1
terminal (green / yellow-
striped wire harness).
Release the room
2
temperature thermistor.
Disconnect the
connectors and
terminal strip for power
supply, all from the
power supply / control
PCB.
Remove the 2 fixing
3
screws for power
supply cable.
Removal Procedure
Warning Be sure to wait 10 minutes or more after turning off all power supplies
before disassembling work.
Procedure
Earth Terminal
Terminal Strip for
Power Supply
Room Temperature
Thermistor
(R2460)
Connectors
(R2461)
Power
Supply
Cable
Screws
(R2462)
Removal of Electrical Box
Points
The wire harnesses of the
connectors are tied up with
the clamp.
The room temperature
thermistor is fixed with the
holder.
There is no need to remove
the fixture inside the
electrical box.
11