Table of Contents
Advertisement
tions. This provides quick access to the primary functions of the keypad.
This is a programmable feature of the
button only. Careful considera-
k
tion should be given to possible operational conflicts before enabling this
feature.
Several keys on the Scan version have sel secondary function. The
key
m
is the SELECT secondary function with the
key remaining the same
C
for the secondary function. On the system version, the
has a secondary
o
function for DEL,
is SELECT and
retains its CLEAR function.
c
m
DISPLAY
The radio's display is shown in Figure 6. The two character lines are used to
display system, group and channel names and also operational messages to
the user. Each line contains eight alphanumeric character blocks. See Figure
2 for a typical display.
Figure 6 - ORION Display
MESSAGES
During radio operation, various messages are displayed on either line one or
line two. Typical messages include control channel status information, such
as system busy or call denied, or messages associated with the radio's opera-
tion, (i.e. volume adjust). These messages are described as follows:
14
Advertisement
Table of Contents
