HORN ALERT
If your radio has the horn alert option; it can be preprogrammed to beep the
vehicle horn when a call is received. (In trunked mode operation only).
This function can be enabled and disabled by pressing the
pressing the
will first sound a pulsed alert warning tone for 3 seconds and then begin blowing
the horn 5 times (2 seconds on, and four seconds off, for 30 seconds). Pressing the
handset PTT key during the pulsed alert tone will prevent blowing the horn. The
horn alert will remain enabled for subsequent calls until disabled.
CALL TIMER
The call timer displays the length of time the conversation in progress, or most
recent call, has taken. To display the call timer during a conversation, press the
key and then press the
operational. The call timer may be viewed after a call has been completed by
pressing the
removed from the display by pressing the
LAST DIGIT CLEAR AND DISPLAY CLEAR
To clear the last digit entered in the display, momentarily depress the
key. To clear the entire display, depress the
one second.
key. With the alarm enabled, when a call is received, the radio
key and then pressing the
key. The timer will be displayed and will be
key.
key and then
key. The timer can be
key and hold for
19