Selection Mode Rules - Ericsson EDACS ORION Operator's Manual

SELECTION MODE RULES

Many operations require selection from a list such as system, group or phone
number. This selection process is handled in the same manner for all lists.
The RAMP control
button are used during the selection process. The following example
c
systems list is used to explain the process:
The hookswitch functions the same as the
call, and menu modes.
The following example systems list is used to explain the process:
After entering a selection mode, the following generic display format will
appear.
Line one shows the currently selected item name (XXXXXXXX) from the
list. Line two indicates the list (YYY) that the selection is to be made from
and the number of the selected item (ZZZ) within the list. (In some cases the
information on lines 1 and 2 will be exchanged. Enter the system selection
mode by pressing the
display appears as follows:
Line one contains the current system name, SOUTH, and line two, SYS = 2,
indicates that selection is from the system list and it is the second system
within the list.
22
and ,
, .
NOTE
1
2
3
4
X X X X X X X X
Y Y Y = Z Z Z
key. If SYSTEM 2 is the current selection, the
S
S O U T H
S Y S =
, 0-9, *, #, the
m
c
SYSTEM
NORTH
SOUTH
EAST
WEST
2
button and the
o
key in I-Call, phone