Table of Contents
Advertisement
ALM
Toggles the external alarm On/Off. The external alarm is
used to indicate the radio is receiving an Individual Call.
Press the key once to enable external alarm and press again
to disable external alarm.
SG1-SG5
Corresponds to five (5) pre-programmed System/Groups.
Pressing a key programmed for SG1 would switch the radio
to the pre-programmed System/Group 1. Pressing a key
programmed for SG2 would switch the radio to the pre-pro-
grammed System/Group 2, etc.
WAIL, YLP,
The WAIL and YLP (Yelp) keys are designed to control an
RST, SL1-
optional Siren package. The SL1-SL8 (Siren/Light) keys
SL8
are designed to control an optional Siren/Light package.
The RST (Reset) key is used to turn all sirens and lights off.
SPK
This key function is used to toggle the external speaker
On/Off.
STO-ST9
The status 0-9 keys are used to send pre-programmed status
message to the EDACS site.
PVT
Enables or disables Private Mode for the System/Group dis-
played. See the PRIVATE OPERATION section.
KEY
Displays the Encrypted Keys. This selects the DISP KEY
operation from the menu functions.
GE*
This key function is used in Conventional Mode to send
GE-STAR emergency signalling.
PA
This key function enables and disables the Public Address
feature.
#
DTMF keypad function.
1-9
Keypad numbers.
*
DTMF Keypad function.
Primary Functions (Quick Access)
The secondary function of the
tween their primary function and their secondary function. When the secon-
dary keypad is active, i.e. entering phone digits for an interconnect call, the
button can be used to toggle the keypad buttons back to their primary
k
function, perform a task (siren/light enable), and then toggle back to finish
entering the digits for the phone number. "PRIMARY" is displayed when
the
button is used to toggle the keypad keys back to their primary func-
k
button is to toggle the keypad buttons be-
k
13
Advertisement
Table of Contents
