Table of Contents
Advertisement
• Pressing
<
scanned group that was last received. This group is recalled for a
period equal to the scan hang time.
Priority Group Scanning
When scan is enabled and the Priority 1 and Priority 2 groups have been
identified, the radio will listen to calls on those groups and the selected
group. While receiving a scanned group call, the radio will continue to
monitor the selected, Priority 1 and Priority 2 groups and will drop the call if
the selected group or other higher priority call becomes active. During a Pri-
ority 2 call the radio will continue to monitor for a Priority 1 group call.
The radio will monitor for Agency and Fleet calls which correspond to the
Agency and Fleet associated with the Priority 1 and Priority 2 groups. Prior-
ity Agency and Fleet calls will be indicated by displaying AGENCY or
FLEET on the System line of the display and associated Priority 1 or 2
group on the Group line of the display.
Turning Scan Off
Toggle scan operation off by pressing
tion on the selected group.
Individual Calls
Receiving and Responding To An Individual Call
When the radio receives an individual call (a call directed only to the user's
radio), it unmutes on the assigned working channel and turns on the BSY in-
dicator. Line one shows ID followed by the logical ID number of the unit
sending the message, or the associated name if the ID number is found in the
individual call list. The individual call indicator display *INDV* is dis-
played on line two. The radio can be programmed to ring when an individual
call is received. If enabled, the ring begins five seconds after the caller
unkeys and will continue until the PTT button, the
pressed.
Hookswitch functions the same as
and menu modes.
34
when scan is on will cause the radio to recall the
NOTE
. The radio will resume opera-
k
c
key in I-CALL, phone call,
c
button, or
is
i
Advertisement
Table of Contents
