Table of Contents
Advertisement
Message
KEY LOAD
KEY ZERO
SYS KEY
System Key
GRP KEY
Group Key
CHN KEY
Channel Key
KEY=1-7
PRIMARY
PRS NAME
Personality Name
COPYRGHT
The ORION radio also provides audible alert tones or "beeps" to indicate the
various operating conditions. These alert tones can be enabled or disabled
through programming.
Name
This is displayed in line 1 of the display when
the encryption key loader is connected.
This is displayed on line 2 of the display when
the operator depresses the reset and option
buttons simultaneously for approximately two
seconds. The encryption keys are zeroed.
This is displayed on line 1 of the display in the
display key mode of the menu. The key of the
key name display is displayed in line 2.
This is displayed on line 1 of the display in the
display key mode of the menu for trunked
systems only. It is followed in the second line
with a key number 'KEY = <1..7>'.
This is displayed on line 1 of the display in the
display
conventional systems only. It is followed in the
second line with a key number 'KEY =
<1..7>'.
This is displayed on line 2 of the display in the
display
conventional when 'SYS KEY' or 'CHN
KEY' are displayed in line 1 and for trunked
when 'SYS KEY' or 'GRP KEY' are displayed
in line 1.
This is displayed on line 1 of the display when
primary keys are enabled.
This is displayed in line 1 of the display under
the revision selection of menu. The personality
name is displayed on line 2 at the same time.
This is displayed on line 1 of the display under
the revision selection of menu. The copyright
year is shown in line 2 of display at the same
time.
ALERT TONES
Description
key
mode
of
the
key
mode
of
the
menu
for
menu
for
19
Advertisement
Table of Contents
