Table of Contents
Advertisement
Group Or
Subfleet
Group Scan
Individual
Call
Queueing
Site
Controller
System
(area)
System
Manager
System
Scan
-
A group of users share the same program group iden-
tification number in their mobile and personal radios.
All units in the same group will receive a dispatch
call placed by any one unit in the group. (Trunked
Mode only).
-
Programming that allows the radio to monitor up to
48 separate groups simultaneously (multi-group de-
code), permitting the user to both monitor and re-
ceive calls from these groups. When a radio receives
a call from one of these groups, it will "lock out",
and not send or receive calls from other groups for a
programmed period of 5, 10, or 15 seconds, permit-
ting the user to respond to the group call. (The radio
may also be programmed for no lock out period.) At
the end of the "lock out" period, the radio sounds
two short low pitched "beeps" and is again ready to
receive a call from any of the programmed groups.
(Trunked Mode Only)
-
Every radio in the system is programmed with a
unique individual identification code. A mobile or
personal unit can be programmed to call another par-
ticular unit by selecting the individual by name or ID
number. (Trunked Mode Only)
-
The process that occurs when all channels in a
trunked system are busy and calls must be addressed
on a priority basis.
-
The computer controlled radio equipment at the re-
peater site that controls a trunking system.
-
The terms "system" and "area" are used interchange-
ably to refer to the particular group of station repeat-
ers currently providing service to the radio.
-
A computer that performs the data basing and system
monitoring for the site controller.
-
A programmed feature to scan (monitor activity on)
separate trunked systems and receive calls on any of
these systems. (Trunked Mode Only)
65
Advertisement
Table of Contents
