Ramp Control; Scan On/Off; Scan Add/Delete; Indicators - Ericsson EDACS ORION Operator's Manual

Hide thumbs Also See for EDACS ORION:

Table of Contents

RAMP CONTROL

The primary function of this rocker type button is to scroll

through the System list or the Group/Channel list depending

upon programming. The secondary function is to increment

or decrement items within a list (phone list for example).

Press

scroll in decreasing order. To auto-ramp, press and hold the

button.

The primary function of this button is to toggle scan opera-

tion on and off. When the radio is scanning, the SCAN LED

is on and all groups or channels in the scan list of the cur-

rently selected systems are scanned.

The secondary function of the SCAN button is to toggle the

keypad buttons between their primary function and their

secondary function.

This rocker type button is used to display the current SCAN

status for a group/channel and then either add or delete the

group/channel from the system scan list.

Transmitter enabled - ON when the radio is transmitting.

BuSY - On indicates a carrier is being received (the channel

is busy). Note that if the selected channel is programmed

for Channel Guard (CG), Digital Channel Guard (DCG) or

Type 99 (T99) tone decode operation, the radio will not un-

squelch if a valid tone or code is not received; the BSY indi-

cator will be on.

to scroll in increasing order and press

Table of Contents