Audio Summed; Audio First Come First Serve; Temporarily Selecting A Non-Selected Radio; Muting A Selected Radio - Ericsson EDACS ORION Operator's Manual

Hide thumbs Also See for EDACS ORION:

Table of Contents

Audio Summed

When audio is summed, the audio from all radios will be available when-

ever the radios receive a call. If two radios receive a call simultaneously both

calls will be heard in the speaker.

When audio is pre-programmed for first come first serve, the audio from the

radio that receives a call first will be heard from the speaker for the duration

of the call and hang time (if enabled). During this time audio from the other

mobile radios will be muted.

TEMPORARILY SELECTING A NON-SELECTED

RADIO

If a non-selected radio is receiving a call, pressing the control unit SCAN

ADD button while the control unit is displaying the receiving radio's call in-

formation, temporarily makes the radio the selected unit. The temporarily se-

lected radio remains selected for a pre-programmed duration. During this

time the radio can be manipulated with the control unit. Each time a call is

received or a button is pressed during this pre-programmed time, the timer

restarts. After the time periods expires, the formerly selected radio resumes

its selected mode. The user may also force the timeout by pressing the radio

selection button.

MUTING A SPECIFIED RADIO

Pressing the control unit mute button associated with a particular radio will

mute its audio for a pre-programmed time period. The time period can be

cleared by pressing the control unit mute button or the radio selection but-

ton.

Dynamic regroup operation permits multiple talk groups (up to eight) to be

added to a radio via the system manager. The radio must be pre-programmed

to respond to regrouping. Dynamic regrouping will not be activated in a ra-

dio until an activation message is sent by the system manager. Each radio

Table of Contents