Table of Contents
Advertisement
mal receive mode display. Continuing with the selection process will return
the display to the same point in the selection process if the selection mode
time out has not yet expired. Any press of the PTT button during the selec-
tion mode process will initiate transmission and exit the selection mode.
MENU
The menu function accesses features that are not available directly from the
keypad. The order and specific number of menu items available is configur-
able through programming. Upon radio power up, the menu item that is at
the beginning of the menu list will always be displayed first. Subsequent ac-
cess to the menu function will return the last menu item that was shown in
the display. To enter the menu mode, press
and
, the
.
m
All of the selection mode rules previously detailed apply to the menu item
selection process with the exception of direct access. The radio will continue
to receive and transmit normally while in the menu function.
A new item is displayed by using the RAMP control
through the list in increasing and decreasing order. The displayed menu item
is made active by pressing
After entering the menu selection mode, the following generic display for-
mat will appear.
Line one indicates the radio is in the menu selection mode. Line two indi-
cates the menu item (YYYYYYYY) that is to be viewed or changed (some
menu items provide radio information and do not have changeable parame-
ters).
An example of the menu item selection process and menu item parameter
change is detailed below for the backlight menu item.
PRESS:
m
The menu mode is entered.
24
and the
buttons are used during the selection process.
c
.
m
Y Y Y Y Y Y Y Y
. The RAMP control
m
M E N U
and
to scroll
,
.
,
Advertisement
Table of Contents
