Table of Contents
Advertisement
Message
PA ON
Public Address On
PA OFF
Public Address Off
ALRM ON
External Alarm Enabled
ALRM OFF
External Alarm
Disabled
PVT DIS
Private Mode Disabled
FRCD PVT
Forced Private
Operation
NO KEY #
Encryption Key Missing
BCKL=1-6
Backlight
GR
Group ID
ID
Individual ID
WHC=1
Who Has Called
PHONE
Phone Call
CONV FS
Conventional Failsoft
16
Name
Indicates that the public address function of
the radio is enabled.
Momentary (2 seconds) indicates that public
address function of the radio was disabled.
Indicates that the external alarm function of
the radio is enabled.
Momentary (2 seconds) indicates that external
alarm function of radio was disabled.
Indicates that private mode is disabled or no
encryption key has been programmed for the
selected group/channel or special call.
Indicates that forced private operation has
been pre-programmed into radio.
Flashing indicator indicates that no encryption
key or an incorrect encryption key is
programmed into the radio.
Display intensity and keypad back light level.
This indicates that the call is a group call and
is followed by the GID of the caller (trunked
mode only).
This indicates the call is an individual call and
the ID number of the caller, example "ID
2725" (trunked mode only).
This display indicates the number from the
Who Has Called list. Individual calls received
but not responded to are stored in a Who Has
Called list. This list is accessible by pressing
the # key and then the INDV key after the
Individual call has timed out or the Clear
button is pressed. This display is on line 2 and
the LID of the caller is displayed on the top
line. Currently the list is not implemented and
the display will always be WHC=1.
Displayed when a phone call is received from
the site. It is displayed in line one of the
display. Line 2 of the display will contain the
display *INDV*" when line 1 contains this
message. The radio interprets a received phone
call as an individual call.
Displayed when a failure of the EDACS
system occurs. All communication will be in
conventional mode (trunked mode only).
Description
Advertisement
Table of Contents
