Microphone Control; External Commands To Cu 6110 - Shure DCS 6000 User Manual

DCS 6000 Digital Conference System User Manual

Microphone Control

External Commands to CU 6110

Turn on microphone
mic_on <seat no><CR>
Instruct the CU to turn on microphone at seat_no.
If the CU turns on the microphone, it will reply with a 'mic_on' command. And, if the microphone
appeared in the request list, it is taken out of the request list, which makes the CU issue a
'mic_request_off' command as well.
Turn off microphone
mic_off <seat no><CR>
Instruct the CU to turn off microphone at seat_no.
If the CU turns off the microphone, it replies with a 'mic_off' command.
Turn off all delegate microphones
mic_all_delegates_off<CR>
Instruct the CU to turn off all delegate microphones.
A Chairman is not turned off.
The CU responds to the command by issuing a 'mic_off' command for each microphone which is turned
off.
Place microphone in reply list
mic_reply_on <seat no><CR>
Insert microphone into reply list.
If the CU inserts the unit into the reply list, it replies with a 'mic_reply_on' command.
Remove microphone from reply list
mic_reply_off <seat no><CR>
Remove microphone from reply list.
If the CU removes the unit from the reply list, it replies with a 'mic_reply_off' command.
Clear reply list
mic_all_reply_off<CR>
Clear the reply list.
The CU responds by issuing a 'mic_reply_off' command for each microphone that is removed from the
reply list.
Set next microphone in the request list on
mic_next_request_on<CR>
Turns on first microphone from the request list on.
If a microphone is turned on, the CU sends a 'mic_on' command and a 'mic_request_off' command.
56