Cu 6110 Central Unit; Overview; Feature License; User Controls & Connectors - Shure DCS 6000 User Manual

DCS 6000 Digital Conference System

CU 6110 Central Unit

Overview

The CU 6110 Central Unit for the DCS 6000 is the
heart of the system. One CU 6110 is needed in
each DCS 6000 system.

Feature License

The CU 6110 Central Unit has as standard basic
functionality:
•
Conference Units
•
Interpretation Channels
•
Vox, voice activating
•
Voting
The unit count above includes DC, DM, CM and DV
units. Dual Delegate units count for 2 units.
By obtaining feature licenses, the functionality can
be expanded to include further features like:
• Conference Units
• Interpreter Channels
• Voting option
• VOX, Voice Activation
The Feature License key is a file delivered from
your authorized DIS Partner and can be uploaded
in the CU using the build in browser. For details
about uploading the Feature license, please refer
to section 'CU 6110 Setup (browser)'
This manual describes all features available.
User controls & connectors
The CU 6110 is suitable for either table-top or 19-
inch rack-mounted use. Four feet (for table top
use) and two mounting brackets (for rack
mounting) are supplied.
Figure 0-A Front view of CU 6110
max. 50
max. 4
No
No
max. 100
max. 500
max. 1000
max. 3800
max. 8
max. 16
max. 31
14
1. Menu display – A 2x20 character OLED-
display is used as an interactive display for
configuring the system.
2. Menu buttons – 5-button keypad for
configuring the unit in combination with the
display (1).
3. Mains on/off switch – After switching the
mains on, the central unit starts up and the
display (1) will light-up after app. 15
seconds. Any connected EX 6010 Extension
Units will automatically be powered up. The
indication in the switch is lighting Green,
when power is switched 'On'. A red light
indicates that power is connected to the
central unit, but the unit is not switched 'On'
(Standby).
If power is removed due to a main power
failure, the unit will maintain the power
state when main power is re-established.
Figure 0-B Back view of CU 6110
1. Power Supply input – Connection of the
external PS CU Power Supply (48V/3A). The
power supply is provided together with the
CU 6110.
Figure 0-C
2. Chain outputs – Four RJ45 connectors for
connecting Conference Unit. The connection
and protocol is called DCS-LAN.
Important: The 'Chain' outputs are only for
connecting Conference Units or other DCS-LAN
compatible equipment.
Connecting a LAN (TCP/IP) connection from a
third part device to this output may damage both
the third part device and the CU 6110.
User Manual
PS CU Power Supply