Labels; Note For Power Connections; Power Disconnect - Shure DCS 6000 User Manual

DCS 6000 Digital Conference System
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
18 Replacement Parts - When replacement
parts are required, be sure the service
technician has used replacement parts
specified by the manufacturer or having the
same characteristics as the original part.
Unauthorized substitutions may result in fire,
electric shock or other hazards.
Safety Check - Upon completion of any
19
service or repairs to this apparatus, ask the
service technician to perform safety checks
to determine that the apparatus is in proper
operating condition.
Overloading - Do not overload outlets and
20
extension cords as this can result in a risk of
fire or electric shock.
Power Sources - This apparatus should be
21
operated only from the type of power source
indicated on the marking label. If you are

Labels

"Lightning Flash Symbol" with the
lightning flash with arrowhead symbol
within an equilateral triangle, is
intended to alert the user to the
presence of un-insulated "dangerous voltage"
within the product enclosure that may be of
sufficient magnitude to constitute a risk of shock
to persons.

Note for Power Connections

Check that the voltage of your local power supply
is within the operating voltage of the unit. If a
voltage conversion is required, consult your DIS
dealer or qualified personnel.
Set the Power switch to 'Off' if it is not used for
several days.
Important: The equipment must be connected
to earth (ground)
The wires in the main lead supplied with the
equipment are colored in accordance with the
following codes:

Power Disconnect

Apparatuses with or without On/Off switches
have power supplied to the apparatus whenever
the power cord is inserted into the power source;
however, the apparatus is operational only when
not sure of the type of power supply you
plan to use, consult your appliance dealer or
local power company. For apparatuses
intended to operate from battery power, or
other sources, refer to the operating
instructions.
Power Lines - An outdoor system should
22
not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can fall into such power
lines or circuits. When installing an outdoor
system, extreme care should be taken to
keep from activating such power lines or
circuits, as contact with them might be fatal.
Object and Liquid Entry - Never push
23
objects of any kind into this apparatus
through openings as they may touch
dangerous voltage points or short-out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the
apparatus. Should any liquid or solid object
fall into the cabinet, unplug the unit and
have it checked by qualified personnel
before operating it further.
"Exclamation Point Symbol" with the
exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating
and maintenance (servicing) instructions in the
literature accompanying the product.
•
Green-and-yellow
•
Blue
•
Brown
The green-and-yellow wire must be connected to
the terminal in the plug marked with the letter E
or with the safety earth symbol or marked with
green-and-yellow color.
The blue wire must be connected to the terminal
marked with the letter N or marked with black
color.
The brown wire must be connected to the
terminal marked with the letter L or marked with
red color.
the On/Off switch is in the On position. The
power cord is the main power disconnect for all
apparatuses.
5
User Manual
Earth (Ground)
Neutral
Live