Connecting Units; Connecting Conference Unit - Shure DCS 6000 User Manual

DCS 6000 Digital Conference System

Connecting Units

This chapter gives an overview of typical system
connections using the CU 6110 Central Unit:
Although the schematics are typical and are
intended to give a general overview,

Connecting Conference Unit

The DCS 6000 Conference Units are connected to
the CU 6110 using EC 6001-xx Cat5e cables. This
is the basic connection of the system.
All four of the DCS-LAN chain connectors on the
CU 6110 can be used for connecting any
Conference Unit or other units.
Please refer to section 'Using only one DCS-LAN
chain' for information about the number of units
which can be connected using one chain.
Figure 0-A Connecting DCS 6000 conference units.
When using JB 6104 Junction boxes, the
conference units can be connected and
disconnected without interrupting the conference.
Figure 0-B Connecting DCS 6000 conference units using JB 6104 Junction Boxes.
combinations of the schematics are however not
only possible, but very common used.
Refer to section 'Using multiple DCS-LAN chains
' when using four chains.
Please refer to the 'User Manual JB 6104' for
further details.
16
User Manual