Using Wireless Language Distribution - Shure DCS 6000 User Manual

DCS 6000 Digital Conference System

Using wireless language distribution

The CU 6110 is connected to the Conference Units
using EC 6001-xx Cat5e cables. All four DCS-LAN
connectors on the CU 6110 can be used for
connecting Conference Units.
In this example one or more Interpreter Booth
with Interpreter Units and DH 6021 Headphone is
connected to the units. Audio from the Interpreter
Units can then be heard in the headphones
Figure 0-H DCS 6000 Digital Conference System with interpretation and wireless distribution, Floor, Ch.1 to Ch.7
connected to the Chairman and Delegate Units
and wired Channel Selectors.
A wireless language distribution system like
'DCS 6000 Digital Infrared Language System'
can then be connected to the Audio Out
connectors (A, B, C, D, E, F, G & H), where the
source to the outputs are configured as 'Floor'
and the interpreter channels. Refer to section
'Web Browser Setup and Control'' item #8.
20
User Manual