Shure DCS 6000 User Manual page 58

DCS 6000 Digital Conference System User Manual
Set max replies
max_replies <max replies><CR>
Maximum number of delegates allowed in the reply list.
<max replies> Can be set to "0" to "250".
The CU responds by sending a 'max_replies' command.
Set max requests
max_requests <max requests><CR>
Maximum number of delegates allowed in the request list.
<max requests> Can be set to "0" to "250".
The CU responds by sending a 'max_requests' command.
Set operation mode
mic_mode <mode><CR>
Set system operation mode.
<mode> Can be set to "auto" (Automatic), "fifo" (First-in-first-out), "manual" (Manual), "vox" (Voice
Active), "auto+reply" (Automatic+Reply), "manual+reply" (Manual+Reply) and "vox+reply" (Voice
Active + Reply)
The CU responds by sending a 'mic_mode' command.
Set interrupt mode
mic_interrupt <mode><CR>
Set ability to interrupt. Defines, whether microphones should interrupt or not.
For CU 59XX <mode> Can be "on" (microphones interrupt) and "off" (microphones do not interrupt)
For CU 6110 <mode> Can be "Same", "Lower" and "Off"
The CU responds by sending a 'mic_interrupt' command.
Set Mic priority
mic_priority <seat_number> <priority><CR>
This command sets the priority of a microphone.
<seat_number>: The microphone to adjust
<priority>: The desired priority. Possible values: 0 to 5, where 0 is the lowest priority and 5 is the
highest priority.
The CU responds to this command by returning a 'mic_priority' message.
Retrieve microphone status
mic_status<CR>
Ask the cu to deliver status of the system (microphones in speak, and microphones in request list).
58