Shure DCS 6000 User Manual page 57

DCS 6000 Digital Conference System User Manual
Turn on microphone from request list
mic_on_from_request xCR>
Turns on microphone x from the request list.
If a microphone is turned on, the CU sends a 'mic_on' command and a 'mic_request_off' command.
Place microphone in request list
mic_request_on <seat no><CR>
Insert microphone into request list.
If the CU inserts the unit into the request list, it replies with a 'mic_request_on' command.
Remove microphone from request list
mic_request_off <seat no><CR>
Remove microphone from request list.
If the CU removes the unit from the request list, it replies with a 'mic_request_off' command.
Clear request list
mic_all_requests_off<CR>
Clear the request list.
The CU responds by issuing a 'mic_request_off' command for each microphone that is removed from
the request list.
Set next microphone on
mic_next_on<CR>
Turns on first microphone from the reply list. If the reply list is empty the first microphone in the request
list is turned on..
If a microphone is turned off, the CU sends a 'mic_off' command.
If a microphone is turned on, the CU sends a 'mic_on' command and a 'mic_reply_off' or
'mic_request_off' command.
Set max total speakers
max_total_speakers <max total speakers><CR>
Maximum number of speakers allowed to speak.
<max total speakers> Can be set to "1" to "8"
The CU responds by sending a 'max_total_speakers' command.
Set max delegate speakers
max_speakers <max speakers><CR>
Maximum number of delegates allowed to speak.
<max speakers> Can be set to "1" to "8"
The CU responds by sending a 'max_speakers' command.
57