Shure DCS 6000 User Manual page 62

DCS 6000 Digital Conference System
Max delegate speakers
max_speakers <max speakers><CR>
Maximum number of delegates allowed to speak.
<max speakers> "1" to "8"
Max replies
max_replies <max replies><CR>
Maximum number of delegates allowed in the reply list.
<max replies> "0" to "250".
Max requests
max_requests <max requests><CR>
Maximum number of delegates allowed in the request list.
<max requests> "0" to "250".
Operation mode
mic_mode <mode><CR>
System operation mode.
<mode> "auto" (Automatic), "fifo" (First-in-first-out), "manual" (Manual) and "vox" (Voice Active)
Interrupt mode
mic_interrupt <mode><CR>
Ability for microphones to interrupt.
For CU 59XX: <mode> "on" (microphones interrupt) and "off" (microphones do not interrupt)
For CU 6110: <mode> "Same" (microphones interrupt other microphones with same or lower priority),
"Lower"(microphones interrupt other microphones with lower priority) and "off" (microphones do not
interrupt other microphones)
Mic priority
mic_priority <seat_number> <priority><CR>
This message indicates the priority of a microphone.
<seat_number>: The microphone that was adjusted
<priority>: The priority. Possible values: 0 to 5, where 0 is the lowest priority and 5 is the highest
priority
Seat State
seat_state <seat number> <seat state> <name><CR>
Information about a seat.
This information is sent from the CU to an external control application in the following situations:
•
When a delegate logs in
•
When a delegate logs out
•
When the seat name is modified
62
User Manual