Shure DCS 6000 User Manual page 34

DCS 6000 Digital Conference System
# Menu
16.
Settings Description
Audio Output –
The 'Source' can be selected
for each of the eight outputs
(the graphics is only showing
four of the eight outputs). The
choices using the dropdown
menu are:
Group, Floor, Floor 1, Floor 2
or any of the interpreter
channels.
When 'Group' is selected for
'Out A', the 'Group A' is the
source and similar for the
three other outputs.
The 'Floor or Interpreter
Channel' selection is used
either for recording of the
interpreted languages or for
connection to a wireless
language distribution system.
The 'Floor 1 or Floor 2'
selection is used when
connection to external PA
system.
If 'Floor, Floor 1, Floor 2 or
any of the interpreter
channels' is selected for an
output (Out A, B, C, D, E, F, G
or H) the corresponding group
is disabled in the 'Group
Setup'.
The 'Audio Out Volume' can be
set for each of the eight audio
outputs (A, B, C, D, E, F, G
and H).
34
User Manual