Shure DCS 6000 User Manual page 35

DCS 6000 Digital Conference System
# Menu
17.
Settings Description
Group Setup –
The Conference units can be
assigned individually to eight
groups (the graphics is only
showing four of the eight
groups).
'Group A' is always used as
the source to the built-in
loudspeakers. A unit can be
selected in 'Group A' and/or in
one of the other three groups.
If a unit is not selected in
'Group A' the audio from this
unit cannot be available in the
built-in loudspeakers.
The 'Group' facility is used if
separate microphones are
required to be recorded or if
external equalization or
volume control is required.
Note: A microphone can only
be present in 'Group A' and in
one other group.
Activating the 'Arrow Down'
button in the right upper
corner reveals a window with
options to change settings for
a range of seats (the graphics
is only showing four of the
eight outputs).
35
User Manual