Shure DCS 6000 User Manual page 59

DCS 6000 Digital Conference System
The CU responds by sending microphone system status. The status is a list of commands from the CU:
mic_status
seat_state
mic_priority
mic_interrupt
mic_on
mic_request_on
max_replies
mic_reply_on
mic_mode
max_total_speakers
max_speakers
max_requests
mic_status_done
Retrieve reply status
reply_status<CR>
Ask the cu to deliver status of the reply configuration.
The CU responds by sending reply system status. The status is a list of commands from the CU:
reply_status
reply_configuration <reply#> <priority> <color> <label>
reply_status_done
Help
help<CR>
help <command><CR>
Help information is available listing all commands supported by the CU. If a command is included in the
help command, details on that command is returned.
Note: The help command results in a number of command lines returned from the CU. The command is intended for
use in a simple console.
(for all units in the system)
(for all units in the system)
(for all units in speakers list)
(for all units in request list)
59
User Manual