Table of Contents
Advertisement
DIS Digital Conference System
10.2
Microphone Control
10.2.1
Commands from External Control to CU 6110
10.2.1.1
Turn on microphone
mic_on <seat no><CR>
Instruct the CU to turn on microphone at seat_no.
If the CU turns on the microphone, it will reply with a 'mic_on' command. And, if the microphone
appeared in the request list, it is taken out of the request list, which makes the CU issue a
'mic_request_off' command as well.
10.2.1.2
Turn off microphone
mic_off <seat no><CR>
Instruct the CU to turn off microphone at seat_no.
If the CU turns off the microphone, it replies with a 'mic_off' command.
10.2.1.3
Turn off all delegate microphones
mic_all_delegates_off<CR>
Instruct the CU to turn off all delegate microphones.
A Chairman is not turned off.
The CU responds to the command by issuing a 'mic_off' command for each microphone which is turned
off.
10.2.1.4
Place microphone in request list
mic_request_on <seat no><CR>
Insert microphone into request list.
If the CU inserts the unit into the request list, it replies with a 'mic_request_on' command.
10.2.1.5
Remove microphone from request list
mic_request_off <seat no><CR>
Remove microphone from request list.
If the CU removes the unit from the request list, it replies with a 'mic_request_off' command.
10.2.1.6
Clear request list
mic_all_requests_off<CR>
Clear the request list.
The CU responds by issuing a 'mic_request_off' command for each microphone that is removed from the
request list.
10.2.1.7
Set next microphone on
mic_next_on<CR>
User Manual CU 6110 rev C.docx
User Manual
56
Advertisement
Table of Contents
