Locking/Unlocking The Keyboard; Viewing The Battery Level; Cloning; Scanner Reset - Uniden BCD325P2 Owner's Manual

3. Press Menu twice to exit.
Locking/Unlocking the Keypad
Hold on any channel. Press Func then to lock or unlock the keypad. The only
keys/knobs that work are Func, Hold, and the scroll control for volume.

Viewing the Battery Level

To view the battery level (in volts) press the scroll control and look at the small
numbers in the upper right of the display. Press the scroll control again to close the
volume level (or let it disappear after 10 seconds).

Cloning

Allows you to clone (copy) data from the scanner to a PC using a 3rd party software.
You must first connect the scanner to the PC using the USB cable.

Scanner Reset

Allows you to initialize the scanner's memory, turn off the scanner. Then press 2, 9,
and Hold while turning it on.
Important! This deletes all programmed data.

PLANNING SYSTEMS, SITES, AND GROUPS

Planning your systems will be very important even if you do have the software.
Number Tags Numbers for system and channel tags can range from 0 to 999.
Systems can have the same number tag but you will get a warning. Same warning
applies to channels. You can assign number tags to channels even if the system
does not have a number tag but, without a system number tag, you can only
navigate to these channels while holding or scanning in that system. See also Using
Number Tags.
If two systems/searches have the same number tag, they will be selected in
sequence (the first time you select the number tag, the scanner will go to the first
system/search assigned to that number tag; if you select the same number tag
again, it will go to the 2nd system/search assigned to that number tag, and so on).
The same rule applies to channel number tags (so don't start at 1 for each channel
group in the system).
Alerts You can program your scanner to alert you when, a channel is received, you
receive a Close Call hit, a talkgroup ID is transmitted with an emergency alert, you
get close to a POI (Point of Interest)/Dangerous Road/Dangerous Crossing, or you
receive a Tone-Out hit. For each alert in the scanner, you can select from 9 different
tone patterns, 15 volume settings, and 2 flash patterns.
40