Uniden BCD325P2 Owner's Manual page 25

Key
• Enter any 3-digit channel number tag then Menu to access
Number
Keys a channel in the current system in Scan Hold Mode.
• Enter any 3-digit system number tag then (.)no then any
3-digit channel number tag then Menu to access a channel
in another system in Scan Hold Mode.
• Enter any frequency/ID then Hold to go directly to in Scan/
Search Hold Modes.
• Press 0-9 to toggle single-digit system/site/search quick
keys on or off in Scan Mode.
• Press 0-9 to toggle custom searches on or off in Search
Mode.
• Press 1-7 to toggle Close Call bands on or off in Close Call
Only Mode.
• Press 4 to move the cursor to the left when editing text.
• Press 6 to move the cursor to the right when editing text.
• Press Func then 0-9 to toggle group quick keys on or off in
Scan Mode.
• Press Func then 1(sr 1)-3(sr 3) to activate or deactivate
the searches assigned to these keys in Any Hold Mode
except GPS.
• Press Func then 4(ifx) to toggle intermediate frequency
exchange for a channel/frequency in Scan/Search/
Weather Hold Modes.
• Press Func then 5(lvl) to toggle the volume offset for a
channel in Scan Hold Mode.
• Press Func then 6(disp) to toggle display modes (1, 2, or
3) in Scan Hold Mode.
• Press Func then 6(disp) to toggle POI displays in GPS
Display Mode.
• Press Func then 7(att) to toggle the attenuator on/off for a
conventional channel in Scan Hold Mode.
• Press Func then 7(att) to toggle the attenuator on/off for a
trunked site in Scan Hold Mode.
• Press Func then 7(att) to toggle the attenuator on/off in
Search/Close Call Only/Tone-Out/Weather Modes.
• Press Func then press and hold 7(att) to toggle global
attenuation on/off in Any Hold Mode except GPS.
• Press Func then press and hold 8(rev) to view the repeater
frequency in Scan/Search/Close Call Only Hold Modes.
Function
25